How Much Does a Paver Patio Cost?

A professionally installed paver patio typically costs about $8 to $24 per square foot in 2026, according to Lawn Love, which puts the national average for a 280 sq ft patio at about $3,350.

Paver patio cost by size

PatioAreaTypical cost ($8–$24/sq ft)
10×10100 sq ft$800–$2,400
12×12144 sq ft$1,152–$3,456
10×20200 sq ft$1,600–$4,800
14×20280 sq ft$2,240–$6,720
20×20400 sq ft$3,200–$9,600
20×25500 sq ft$4,000–$12,000

Why the range is so wide

  • Paver type: basic concrete pavers cost least; clay brick, natural stone and porcelain cost more.
  • Pattern: herringbone and curves mean more cuts and labor.
  • Base preparation: poor or clay soil needs deeper excavation and more gravel.
  • Extras: steps, seat walls, fire pits and lighting.

DIY materials for a 200 sq ft patio

The paver calculator gives 990 brick-size (4×8) pavers with 10% waste, about 3.7 tons of base gravel at 4 inches and 0.8 tons of bedding sand. Lawn Love notes a plate compactor rents for roughly $80+ per day — budget for it, because compaction is what keeps pavers from sinking.

Sources

Prices vary widely by region, season and contractor. Use these ranges to plan, then get at least three written quotes.

Last reviewed November 1, 2026. Results are estimates — confirm with your supplier.

Calculators for this

Paver CalculatorPavers, base gravel and bedding sand for patios and walkways.Gravel CalculatorTons and cubic yards of gravel, crushed stone or sand for driveways and paths.Sand CalculatorBags, cubic yards and tons of play sand or paver sand for any area.

Keep reading

How Much Does a Concrete Driveway Cost?About $6–$16 per sq ft installed — one- and two-car sizes charted.How Much Does a Concrete Patio Cost?Poured $4–$10 per sq ft, stamped $8–$25 — by patio size.How Much Does a Concrete Slab Cost?About $4–$8 per sq ft installed for a basic 4-inch slab — with a size chart.How Much Does a Gravel Driveway Cost?Typically $1–$3 per sq ft installed — with tonnage by size.