How Much Does a Concrete Driveway Cost?

A new concrete driveway typically costs about $6 to $16 per square foot installed in 2026, according to LawnStarter, which puts the average project around $3,500. Concrete Network prices a plain gray driveway at about $5–$8 per sq ft and decorative finishes from about $8 to $21.

Concrete driveway cost by size

DrivewayAreaConcrete at 5 in (+10%)Typical cost ($6–$16/sq ft)
Single car, 10×20200 sq ft3.4 cu yd$1,200–$3,200
Single car, 12×24288 sq ft4.9 cu yd$1,728–$4,608
Two car, 20×20400 sq ft6.8 cu yd$2,400–$6,400
Two car, 24×24576 sq ft9.8 cu yd$3,456–$9,216
Two car, 24×30720 sq ft12.2 cu yd$4,320–$11,520
Long single, 12×50600 sq ft10.2 cu yd$3,600–$9,600

Plain vs. decorative

  • Plain broom finish: the most affordable and the most common.
  • Exposed aggregate and colored concrete: mid-range upgrades.
  • Stamped concrete: the most expensive, and it needs periodic resealing.

What else affects the price

  • Removing an old driveway — demolition and hauling are often quoted separately.
  • Thickness and reinforcement: driveways are commonly 4–6 inches thick with wire mesh or rebar; heavier vehicles need more.
  • Base preparation on soft or poorly draining soil.
  • Permits and work in the public right-of-way at the curb.

Estimate the concrete yourself

Ready-mix is ordered by the cubic yard. Use the concrete calculator to turn your driveway's length, width and thickness into cubic yards, then compare quotes on the same volume.

Sources

Prices vary widely by region, season and contractor. Use these ranges to plan, then get at least three written quotes.

Last reviewed November 1, 2026. Results are estimates — confirm with your supplier.

Calculators for this

Keep reading